Every thing with plumbing had a leak, all minor, but things that needed to be fixed or upgraded. Luckily I am handy enough that I was able to repair all of the things myself.
-------------------------------------------------------------------------------
First to be fixed was the toilet leak. It kept running, or had a slow constant flow, which over time will run th water bill up. All it needed was a new flapper because the seal on the old one was the reason. After installing flapper it sealed it prefectly and fixed that small leak.
Old Flapper
New Flapper
--------------------------------------------------------------------------------
Next the hot water handle for the shower/tub leaked. Since the hot water leaked I figured it might be just a matter of time until the cold did too. I took the handles off and pulled the valves out and replaced both valves.
Took Handle Off
Pulled The Valves Out
New Valve on left and Old Valve On Right
-----------------------------------------------------------------------------
Next the bathroom sink leaked out the bottom, which you really only saw when you pulled the drain and filled up the sink. I didn't want any type of leak so I replaced the entire drain filler and stop valve.
Old Drain Plug (left) and New Drain Plug (right). Big difference.
-------------------------------------------------------------------------------
Then the kitchen sink had a small leak right at the bottom where the faucet came into the base. It was minor but still a leak and also I wanted to upgrade it anyways.
Old Faucet
New Faucet with pull out handle and soap dispenser.
Sunday, March 8, 2009
Subscribe to:
Post Comments (Atom)
wow chris u are quite the handy guy. you need to teach mick this stuff!
ReplyDelete